Skip to product information
  • disinfectant for surgical instruments
1 of 1

Korso Plus®

Korso Plus, 5th Generation QAC, aldehyde-free disinfectant that kills 99.999% of microbes in less than 5 minutes. It combines cleaning and disinfection in one action with a high degree of material compatibility. Korso Plus is effective even under dirty conditions and particularly for instruments contaminated with protein-containing material. It can also be used for instrument disinfection, surface mopping and fogging.

Passes  EN 1040, EN 13624 (Fungicidal & Yeasticidal), EN 13727 (Bactericidal, incl.MRSA), EN 14561, EN 14347.

Regular price
Rs. 237.00
Sale price
Rs. 178.00
Shipping calculated at checkout.


Know more
Download PDF

Frequently Asked Questions

1) What is the 5th generation QAC in Korso Plus?

Korso Plus is an aldehyde-free 5th generation QAC (Quaternary Ammonium Compounds) that makes it bactericidal, yeasticidal, tuberculocidal, fungicidal, virucidal, and sporicidal properties. It has surface protectors and can be used for surface wet wipe mopping, fogging, and also for instrument disinfection.

2) How to use Korso Plus for surface disinfection?

Use Korso Plus based on the risk area of the hospital (0.5% - 2%) and follow the steps below:
• Use a PPE kit for protection while disinfecting the surface.
• Always clean the surface and remove all visible dirt.
• Add the concentrate using a measuring funnel/beaker into the bucket.
• Now add the required tap water and dilute the solution.
• Conduct surface mopping using the correct technique.
• While doing this, ensure the fans/ACs are off, and windows are closed.
• Follow the exposure time of 15 - 20 mins.
• Allow the surface to air dry.
(Do not over or underuse the disinfectant).

3) How to use Korso Plus for Instrument disinfection?

Directions for use – Immersion Bath Procedure: Korso Plus is supplied as concentrate. Open or take instruments and devices apart as far as possible. Make sure the instruments are completely covered by Korso Plus solution without any hollows or bubbles.
Standard Solution: Use 2% dilution only (20ml in 1-liter solution). Always prepare the solution with max room temperature water.
Soak for 15 mins in prepared Korso Plus diluted solution and for 30 mins if in dirty conditions.
Rinse Phase: After disinfection, adequate rinsing shall be carried out. In practice, rinse times of 10 minutes have proved most appropriate. The water should be of at least drinking water quality.