Frequently Asked Questions

1) Is Bacillocid® Special, a concentrate or a ready-to-use product?

Bacillocid® Special is supplied as a concentrate product, which has to be diluted with water (as per Raman & Weil’s dilution chart & risk area of the hospital) for surface & environmental disinfection.

2) Should I add a higher concentration of Bacillocid® Special for better results?

For Bacillocid® Special, refer and follow the dilution instructions given in Raman & Weil’s product literature to get the best results.

3) What makes Bacillocid® Special the perfect choice for surface disinfection?

Bacillocid® Special is the perfect choice for surface disinfection because of the following-

• Dual property of CLEANING & DISINFECTION
• Passes relevant EN norms
• Requires short contact time.
• It is effective against Clostridium difficile spores, bacteria (mycobacteria), yeast, fungi, and enveloped & non - enveloped viruses.
• It contains corrosion inhibitors that protect the surface.

4) How should you use Bacillocid® Special for surface mopping?

Use Bacillocid® Special based on the risk area of the hospital and follow the steps below. Refer to Raman & Weil’s dilution chart for the dilutions.

• Use a PPE kit for protection while disinfecting the surface.
• Always clean the surface, and remove all visible dirt.
• Add the concentrate using a measuring funnel/beaker into the bucket.
• Now add the required tap water & dilute the solution.
• Conduct surface mopping using the correct technique.
• While doing this, ensure the fans/ACs are off, and windows are closed.
• Follow the exposure time of 15 - 20 mins.
• Allow the surface to air dry.

5) Can you use Bacillocid® Special for fogging?

Yes, Bacillocid® Special can be used for fogging.