• Bacillocid® Extra - rwscience
  • Bacillocid® Extra - rwscience
  • Bacillocid® Extra - rwscience
  • Bacillocid® Extra - rwscience
  • Bacillocid® Extra - rwscience
1 5

Bacillocid® Extra

Bacillocid® Extra is a surface and environmental disinfectant concentrate (tested as per new standards) that has exceptional cleansing property & a wide range of germicidal action, ensuring total disinfection of rooms & surfaces. It shows broad spectrum properties - bactericidal, sporicidal, fungicidal (Aspergillus niger), yeasticidal & tuberculocidal activity.

Passes European Norms: EN 1040, EN 1275, EN 1276, EN 1650, EN 13624, EN 13727, EN 14347, EN 14348, EN 16615, EN 14476 incl. Covid-19.

Rs. 451.00
Rs. 751.00
Rs. 451.00
Shipping calculated at checkout.

INCLUSIVE OF ALL TAXES

Size
Know more
Download PDF

Frequently Asked Questions

1) Is Bacillocid® Extra a concentrate or a ready-to-use product?

Bacillocid® Extra is supplied as a concentrate product, which has to be diluted with water (as per Raman & Weil’s dilution chart & risk area of the hospital) for surface & environmental disinfection.


2) Is it advised to add more concentration of Bacillocid® Extra for better results?

For Bacillocid® Extra, refer and follow the dilution instructions given in Raman & Weil’s product literature to get the best results.


3) What makes Bacillocid® Extra a perfect choice for surface disinfection?

Bacillocid® Extra is the perfect choice for surface disinfection because of the following-

  • It has dual property of CLEANING & DISINFECTION
  • Passes relevant EN norms
  • Requires short contact time.
  • It is effective against Clostridium difficile spores, bacteria (mycobacteria), yeast, fungi, and enveloped & non - enveloped viruses.
  • It contains corrosion inhibitors that protect the surface.


4) How should you use Bacillocid® Extra for surface mopping?

Use Bacillocid® extra based on the risk area of the hospital and follow the steps below. Refer to Raman & Weil’s dilution chart for the dilutions.

  • Use a PPE kit for protection while disinfecting the surface.
  • Always clean the surface and remove all visible dirt.
  • Add the concentrate using a measuring funnel/beaker into the bucket.
  • Now add the required tap water & dilute the solution.
  • Conduct surface mopping using the correct technique.
  • While doing this, ensure the fans/ACs are off, and windows are closed.
  • Follow the exposure time of 15 - 20 mins.
  • Allow the surface to air dry.
(Do not over or underuse the disinfectant).



5) Can you use Bacillocid® Extra for fogging?

Yes, Bacillocid® Extra can be used for fogging.